Comparative Evaluation of Water Sorption in High-Strength Denture Base Resin Reinforced with 5% Silanized Titanium Dioxide Nanoparticles Using Microwave and Conventional Polymerization Methods: An In-vitro Study
K. K. Tharun *
Department of Prosthodontics and Crown & Bridge, Bapuji Dental College and Hospital, Davangere, Karnataka, India.
M. D. Chethan
Department of Prosthodontics and Crown & Bridge, Bapuji Dental College and Hospital, Davangere, Karnataka, India.
D. B. Nandeeshwar
Department of Prosthodontics and Crown & Bridge, Bapuji Dental College and Hospital, Davangere, Karnataka, India.
*Author to whom correspondence should be addressed.
Abstract
Background: Water sorption is a critical determinant of the dimensional stability and long-term clinical performance of polymethyl methacrylate (PMMA) denture base resins. Absorbed water acts as a plasticizer within the polymer matrix, causing volumetric expansion and deterioration of mechanical properties. Titanium dioxide (TiO₂) nanoparticle reinforcement, particularly with silane surface treatment, has attracted considerable interest for improving the physical properties of PMMA. However, the combined influence of silanized TiO₂ incorporation and polymerization technique on water sorption in high-strength PMMA has not been comprehensively characterized.
Aim: To evaluate and compare the water sorption behavior of high-strength PMMA denture base resin reinforced with 5% silanized TiO₂ nanoparticles when processed using conventional water bath and microwave polymerization techniques.
Materials and Methods: Thirty standardized disc-shaped specimens (n = 15 per group) were fabricated in accordance with ADA Specification No. 12. Group A underwent conventional water bath polymerization (74°C/2 h + 100°C/1 h) and Group B underwent microwave polymerization (500 W/3 min). Water sorption was calculated gravimetrically after 7-day distilled water immersion at 37 ± 2°C and subsequent desiccation. Statistical analysis included the Shapiro–Wilk test, Levene’s test, and independent samples t-test (p < 0.05) with Cohen’s d effect size.
Results: Group A demonstrated significantly lower mean water sorption (3.74 ± 2.33 µg/mm³) versus Group B (9.00 ± 5.52 µg/mm³; p = 0.002; Cohen’s d = 1.243).
Conclusion: Conventional water bath polymerization conferred superior resistance to water sorption compared to microwave polymerization in TiO₂-reinforced high-strength PMMA. The polymerization technique remains a critical determinant of material behavior even when nanoparticle type and concentration are held constant.
Keywords: Polymethyl methacrylate, titanium dioxide nanoparticles, water sorption, polymerization technique, conventional polymerization, silanization, nanocomposite